Texart XT-640S-F Flatbed Direct-to-Textile and Direct-to-Garment Printer | Specifications and Accessories

ON-DEMAND
TEXTILE PRINTING
FOR GARMENTS AND FABRICS

 

• A flexible hybrid solution - print onto both garments and fabrics
• Can print cotton, white polyester, denim, and leather* 
• Available in 3 bed sizes  

Printing Method   Piezo ink-jet
Acceptable media
Width: 1625 mm
Thickness/height: 0.01 to 200mm
Weight bed: 100 kg / m2
Bed Size   1696 (W) x 2090 (D) mm
Ink cartridges
Types: INKU DTG
Colours: Cyan, Magenta, Yellow, Black, White
Ink configurations   CMYKWhWh
Vacuum System
Fan: 1
Vacuum zones: 1
Printing resolution (dpi)   Maximum 1440 dpi
Movement method   High resolution stepping motor
Distance accuracy (*1)   Error of less than ±0.3% of distance travelled, or ±0.3 mm, whichever is greater
Horizontal repeat accuracy (*2)   ±0.01mm
Output modes   Continuous, unload, return to origin, layered
Media height setting   Manual, auto sensor
Surface control   Manual, auto sensor
Control Interface   7" Colour LCD touch screen
Interface   Ethernet Base 10/100
Power-saving function   Automatic sleep feature
Power- requirements   230V 16A 2P+E
Power Consumption
Print with vacuum 2.2 kW maximum
Sleep mode 150 w
Acoustic noise level
Print with vacuum < 70 db
During standby < 40 db
Dimensions
Printer unit 2835 (W) x 2152 (D) x 1780 (H) mm
Control tower 530(W) x 530 (D) x 1080 (H) mm
Weight (kg)   650 + 50 kg (Control tower)
Weight distribution   6 points - (80 mm diameter)
Environment
Power on Temperature: 20 to 32ºC (68 to 90ºF) (22ºC [72˚F] or more recommended) , Relative humidity: 35 to 80% (no condensation)
Power off Temperature: 5 to 40˚C (41 to 104˚F), Relative humidity: 20 to 80% (no condensation)
Accessories   User manual, power cable, installation toolbox

(*1) With Roland PET film, print travel: 1 m. Temperature: 25°C (77°F), relative humidity: 50%
(*2) The following conditions must be met: Media type: Media specified by Roland DG Corp. Side margins: 25 mm or more for both the left and right margins. Front margin: 35 mm or more. Excluding expansion/contraction of the media Range for assured repetition accuracy length 3000 mm.
Specifications, designs and dimensions listed may be subject to change without notice.

Printing Method   Piezo ink-jet
Acceptable media
Width: 1625 mm
Thickness/height: 0.01 to 200mm
Weight bed: 100 kg / m2
Bed Size   1696 (W) x 3090 (D) mm
Ink cartridges
Types: INKU DTG
Colours: Cyan, Magenta, Yellow, Black, White
Ink configurations   CMYKWhWh
Vacuum System
Fan: 2
Vacuum zones: 2
Printing resolution (dpi)   Maximum 1440 dpi
Movement method   High resolution stepping motor
Distance accuracy (*1)   Error of less than ±0.3% of distance travelled, or ±0.3 mm, whichever is greater
Horizontal repeat accuracy (*2)   ±0.01mm
Output modes   Continuous, unload, return to origin, layered
Media height setting   Manual, auto sensor
Surface control   Manual, auto sensor
Control Interface   7" Colour LCD touch screen
Interface   Ethernet Base 10/100
Power-saving function   Automatic sleep feature
Power-requirements   230V 16A 2P+E
Power Consumption
Print with vacuum 2.6 kW maximum
Sleep mode 150 w
Acoustic noise level
Print with vacuum < 70 db
Sleep mode < 70 db
Dimensions
Printer unit 2835 (W) x 3152 (D) x 1780 (H) mm
Control tower 530(W) x 530 (D) x 1080 (H) mm
Weight (kg)   850 + 50 kg (Control tower)
Weight distribution   8 points - 8 feet (80 mm diameter)
Environment
Power on Temperature: 20 to 32ºC (68 to 90ºF) (22ºC [72˚F] or more recommended) , Relative humidity: 35 to 80% (no condensation)
Power off Temperature: 5 to 40˚C (41 to 104˚F), Relative humidity: 20 to 80% (no condensation)
Accessories   User manual, power cable, installation toolbox

(*1) With Roland PET film, print travel: 1 m. Temperature: 25°C (77°F), relative humidity: 50%
(*2) The following conditions must be met: Media type: Media specified by Roland DG Corp. Side margins: 25 mm or more for both the left and right margins. Front margin: 35 mm or more. Excluding expansion/contraction of the media Range for assured repetition accuracy length 3000 mm.
Specifications, designs and dimensions listed may be subject to change without notice.

Printing Method   Piezo ink-jet
Acceptable media
Width: 1625 mm
Thickness/height: 0.01 to 200mm
Weight bed: 100 kg / m2
Bed Size   1696 (W) x 3818 (D) mm
Ink cartridges
Types: INKU DTG
Colours: Cyan, Magenta, Yellow, Black, White
Ink configurations   CMYKWhWh
Vacuum System
Fan: 3
Vacuum zones: 3
Printing resolution (dpi)   Maximum 1440 dpi
Movement method   High resolution stepping motor
Distance accuracy (*1)   Error of less than ±0.3% of distance travelled, or ±0.3 mm, whichever is greater
Horizontal repeat accuracy (*2)   ±0.01mm
Output modes   Continuous, unload, return to origin, layered
Media height setting   Manual, auto sensor
Surface control   Manual, auto sensor
Control Interface   7" Colour LCD touch screen
Interface   Ethernet Base 10/100
Power-saving function   Automatic sleep feature
Power- requirements   230V 16A 2P+E
Power Consumption
Print with vacuum 3.5 kW maximum
Sleep mode 150 w
Acoustic noise level
Print with vacuum < 70 db
">Sleep mode < 70 db
Dimensions
Printer unit 2835 (W) x 3880 (D) x 1780 (H) mm
Control tower 530(W) x 530 (D) x 1080 (H) mm
Weight (kg)   1050 + 50 kg (Control tower)
Weight distribution   10 points - 10 feet (80 mm diameter)
Environment
Power on Temperature: 20 to 32ºC (68 to 90ºF) (22ºC [72˚F] or more recommended) , Relative humidity: 35 to 80% (no condensation)
Power off Temperature: 5 to 40˚C (41 to 104˚F), Relative humidity: 20 to 80% (no condensation)
Accessories   User manual, power cable, installation toolbox

(*1) With Roland PET film, print travel: 1 m. Temperature: 25°C (77°F), relative humidity: 50%
(*2) The following conditions must be met: Media type: Media specified by Roland DG Corp. Side margins: 25 mm or more for both the left and right margins. Front margin: 35 mm or more. Excluding expansion/contraction of the media Range for assured repetition accuracy length 3000 mm.
Specifications, designs and dimensions listed may be subject to change without notice.

CONSUMABLES

Model Description
INKU-DTG-500-CY Cyan Pigment DTG Ink, 500 ml Cartridge
INKU-DTG-500-MG Magenta Pigment DTG Ink, 500 ml Cartridge
INKU-DTG-500-YE Yellow Pigment DTG Ink, 500 ml Cartridge
INKU-DTG-500-BK Black Pigment DTG Ink, 500 ml Cartridge
INKU-DTG-500-WH White Pigment DTG Ink, 500 ml Cartridge
INKU-DTG-10000-PL Pre-treatment for light garments, 10 Litre Bottle
INKU-DTG-10000-PD Pre-treatment for dark garments, 10 Litre Bottle
INKU-DTG-2000-CL Cleaning Liquid / Maintenance solution, 2 Litre Bottle
These items will be added soon:
INKU-DTG-1000-CY Cyan Pigment DTG Ink, 1 Litre Bottle
INKU-DTG-1000-MG Magenta Pigment DTG Ink, 1 Litre Bottle
INKU-DTG-1000-YE Yellow Pigment DTG Ink, 1 Litre Bottle
INKU-DTG-1000-BK Black Pigment DTG Ink, 1 Litre Bottle
INKU-DTG-1000-WH White Pigment DTG Ink 1, Litre Bottle

OPTIONAL ITEMS

Model Description
JIG-XTS-200-260 Jig for Small/Medium item - Print area 200 x 260mm
JIG-XTS-300-400 Jig for Large/XL item - Print area 300 x 400mm
JIG-XTS-390-490 Jig for XL/XXXL item - Print area 390 x 490mm
DOCK-XTS-2 Docking Jig for two JIG-XTS-300-400 Jigs
DOCK-XTS-3 Docking Jig for three JIG-XTS-200-260 or one JIG-XTS-390-490 Jig
DOCK-XTS-BASE Docking Jig Adapter (required for Jig Printing)
ASB-640S Anti-static bar
2 x TM-F-UN-1 Tilting Mechanism for XT-640S-F200 Flatbed
3 x TM-F-UN-1 Tilting Mechanism for XT-640S-F300 Flatbed
5 x TM-F-UN-1 Tilting Mechanism for XT-640S-F400 Flatbed
XT-640S-KIT_EB1 Install and Maintenance Kit for 500 ml Cartridges
XT-640S-KIT_EB2 Six Bottle, Refillable Bulk Ink System with White Circulation
Including Install and Maintenance Kit

Specifications, designs and dimensions listed may be subject to change without notice.