DWX-42W Wet Dental Mill
Wet dental milling machine DGSHAPE DWX-42W

Intelligent Machine.
Effortless Production.
Superior Results.


The DGSHAPE DWX-42W wet dental milling machine enables wet milling of popular glass ceramic and composite resins to create dental prosthetics with high precision and accuracy.

  • High speed production with proprietary DGSHAPE dental milling spindle
  • Expanded 6-tool Automatic Tool Changer for uninterrupted milling
  • LAN capable for network and hardware connection and communication
  • VPanel user interface for easy monitoring of milling jobs and tools

Download brochure 

From in-clinic to dedicated high-efficiency labs,
the DWX-42W is engineered to fit your milling needs.
Wet dental milling machine for aesthetic dental restorations

Incredibly Accurate, High Aesthetic Restorations


Composite Resin Pin 

Composite Resin
Superior margins and chip resistance

Glass Pin 

Glass Ceramics
Consistent flexural strength, optimised fit


Inlays / Onlays
DWX-42W Wet Dental Mill Spindle

Specially Designed Spindle

  • Dental milling spindle designed and built by DGSHAPE
  • Requires less air pressure and volume without sacrificing performance
  • Doesn’t require a high-volume compressor— perfect for in-clinic environments
  • Delivers maximum efficiency in a dental lab environment
75% Less Air Volume
50% Less Air Pressure
Close up of DWX-42W Wet dental mill

Elevated Performance



than previous generation DGSHAPE wet mill



for uninterrupted production


Newly designed
for larger capacity and greater flow

dual filter icons
Specially engineered
require replacement less often, saving cost and time


for greater stability and fine milling quality 

dual filter icons

for enhanced overall performance

New 6-Pin Adapter DWX-42W

Increase Your Milling Capacity

With the 6-Pin Adapter

Double your unattended milling capacity from 3 to 6 jobs with the ZV-42W 6-pin adapter, engineered for the DWX-42W and 14 mm pin-type blocks or smaller. Mill up to 6 pin-type blocks together with this easy to install accessory. Compatible with the latest version of Millbox and hyperDENT CAM software* and designed to be used interchangeably with theAK-1 Abutment Kit . The 6-pin adapter is yet another accessory to the DWX-42W wet mill to increase production and profitability.

*compatible with Millbox for DGSHAPE Wet Mills v4.2.x (2020), or later and hyperDENT service pack 1 for v9.1, or later

Enhanced User Experience

LAN connectivity provides more options to integrate hardware, such as scanners, into your workflow

Included VPanel offers a user-friendly interface for monitoring milling jobs, tool life, and cost considerations

Compatible with open-architecture CAM software to accept all STL files

Additional Information

Cuttable material* Glass ceramics, composite resins
Loadable workpiece shape Pin-type Max. 40 (W) × 20 (D) × 20 (H) mm (1.5 × 0.8 × 0.8 in.)
Operating speed XYZ axis 6 to 1800 mm/min (0.24 to 70.9 in./min.)
Spindle speed 15000 to 60000 rpm
Rotary axis travel angle ±360°
Number of burs housed 6
Attachable bur Shank diameter 3 mm, dedicated grinding bur
Required compressor specifications
(Oil-free, with dryer)
Pressure 0.3 MPa or higher
Air Capacity
39 l / min or higher
Control command set RML-1, NC code
Power requirements AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category: II, IEC 60664-1), 2.1A
Power consumption Approx. 190 W
Operating noise During operation 70 dB(A) or less (when not cutting)
During standby 48 dB(A) or less
External dimensions 482 (W) × 560 (D) × 600 (H) mm (19 × 22 × 23.6 in.)
Weight 61 kg
Installation environment

Indoor use at altitudes up to 2000 m, Temperature: 5 to 28°C (41 to 82°F), Humidity: 35 to 80% RH (no condensation), Ambient pollution degree: 2 (as specified by IEC 60664-1), Short-term temporary overvoltage: 1440 V, Long-term temporary overvoltage: 490 V
Included items Power cable, USB cable, Manuals, DGSHAPE software package CD, Automatic correction jig, Grinding burs, Hexagonal screwdriver, Collet Maintenance Kit etc.
Specifications, designs and dimensions listed may be subject to change without notice.
* Even when made from the described materials, some workpieces cannot be milled due to specifications or physical properties. For more information, contact your authorised Roland DG Corporation dealer.
 Item  Model  Description
 Grinding burs (High-quality)  ZGB2-125D  R1.25 mm (ø 2.5 mm) replacement bur
 ZDGB2-50D  R0.5 mm (ø 1 mm) replacement bur
 ZDGB2-25D  R0.25 mm (ø 0.5 mm) replacement bur
 ZGB-125DS  R1.25mm (ø2.5mm)replacement bur
 Grinding burs (Standard)  ZGB-125D  R1.25 mm (ø 2.5 mm) replacement bur
 ZGB-50D  R0.5 mm (ø 1 mm) replacement bur
 ZGB-25D  R0.25 mm (ø 0.5 mm) replacement bur
 Collet  ZC-3D  Replacement collet
 Coolant Filter  ZF2-CLD  Replacement filter for coolant tank x 2
 Coolant Additive  ZAW-1000D  Additive for coolant 1000 ml
 Chelating Additive  ZCH-100D  Coolant additive chelating agent 100 ml

Warranty and Support

DGSHAPE by Roland ensures that your wet dental milling machine is always up and running with a 1-year warranty plus support from a network of dedicated dealers and certified service engineers. From our helpful customer support team to an abundance of training and education, Roland cares about your customer needs before and after buying your dental milling machine.


Peace-of-Mind Reliability

Roland has been at the forefront of advanced machine manufacturing for 35 years, providing practical and reliable technology with unmatched service and support.

DGSHAPE by Roland further delivers on this reliability promise but also improves user experience, making it incredibly easy for dental labs and clinics to produce high quality, cost-effective dental prosthetics while improving workflow efficiencies.