MPX-95DPM Specifications

Model MPX-95DPM
Imprintable material Gold, silver, copper, platinum, brass, aluminum, iron, stainless steel, titanium, etc.
(Vickers hardness [HV] of the imprint surface must be 200 or less.)
Loadable material size Using a base table + base plate: 100 mm (W) x 200 mm (L) x 40 mm (H) or 200 mm (W) x 100 mm (L) x 40 mm (H)
Using a base plate only: 100 mm (W) x 200 mm (D) x 70 mm (H)
200 mm (W) x 100 mm (L) x 70 mm (H)
*The above are when the cover is closed. When the cover is open, there is no limit on how wide the material can be, but the area on the material to mark must be placed within the imprintable area.
Imprint area Maximum imprintable area 80 mm (W) x 80 mm (D) x 70 mm (H)
Recommended imprint area 50 mm (W) . 50 mm (D) . 70 mm (H)
Resolution High resolution 529 dpi
Photo 353 dpi
Text 265 dpi
Vector 1058 dpi
Imprint direction Unidirectional imprinting or bidirectional imprinting (Selectable with Windows driver)
Imprint speed (Default) Photo 50 mm/sec
High resolution/Text 33 mm/sec
Vector 24 mm/sec
Interface USB
Power requirements Dedicated AC adapter AC 100 to 240 V ±10%, 50/60 Hz
Main unit DC 19 V, 1.2 A
Power consumption Approx. 21 W
Operating noise 70 dB (A) or less
Operating temperature 10 to 30°C
Operating humidity 35 to 80% (no condensation)
External dimensions 286 mm (W) x 383 mm (D) x 308 mm (H)
Weight 12 kg (26.5 lb)
Included items AC adapter, power cable, test-use material, USB cable, Roland Software Package CD-ROM, User's Manual, etc.

System requirements for USB connection

Computer PC preinstalled with Windows 10, 8.1, or 7 (32- or 64-bit), or upgraded computer originally preinstalled with Windows 7 or later.
USB cable Use the included USB cable

Conditions when imprinting curved surfaces

Choose material when imprinting on a curved surface taking into consideration the following limitations. These figures show the imprinting area possible for a curved surface and the area that the marking pin can reach with respect to the diameter of the cylinder when the head cap (CAP-HEAD MPX-90) is attached to the head unit. However, these limitations do not assure the quality of the photographic image.


Diameter of cylinder with extended curved surface (ϕ) Recommended imprint area (A) Area reached by the marking pins (B)
10 mm 2.0 mm 2.8 mm
20 mm 2.8 mm 4.0 mm
30 mm 3.4 mm 4.8 mm

Specifications, designs and dimensions listed may be subject to change without notice.